| Model | FIRE-NM |
| Input voltage | 230±15% V |
| Phase | Single |
| Frequency | 50/60 Hz |
| Cutting capacity | Up to 110 mm |
| Straight cut | 1.8 mtr length or multiples by adding rails |
| Circle cut | 75-1200 mm Ø |
| Bevel cutting | Up to 45 degrees |
| Cutting speed | 100-980 mm/min |
| Horizontal adjustment of cutting torch | 80 mm |
| Vertical adjustment of cutting torch | 60 mm |
| Speed control | Wire wound potentiometer |
| Inlet gas hose connections for gas torch | 1/4” BSP RH & LH |
| Nozzle | NM |
| Dimensions (LxWxH) | 430x250x240 mm |
| Weight (approx.) | 10.5 kg |
Pug Cutting Machine
- High-quality motorized flame cutting machine designed to cut straight lines, circles, and bevels with clean, sharp, and smooth edges.
- Travels on standard 1.8 meters extruded aluminum rail.
- Can be Swiveled to cut levels up to 45° with Rack and Pinion.
- No ignition at the time of cutting because of “Nozzle-Mix” technology.
- Durable, efficient, and precise horizontal and vertical adjustment of the torch.
- Bevel setting with locking facility means bevel accuracy during long cutting.
- Handy, lightweight, and robust machine modeled for long, trouble-free application.
- Heat reflector with an air gap, which protects the motor and other electrical parts from overheating.
- The equipment is lightweight, and they have a wrap round handle for easy portability and protection.
- A single lever ON-OFF mechanism for cutting makes the closing and resuming of cutting very simple and saves gases.
- Using extendable tracks, this machine can generate straight cuts of any length, square or bevel edge. With the same precision, this machine can cut circles and also shape with gradual curves, when hand-guided.
